Epoxy Flooring FAQs — Orlando

Central Florida's humidity sits in the 70s-to-90s most of the year, and that is the single biggest reason a do-it-yourself or rushed epoxy floor peels in Orlando. Unlike the coast, our problem is not salt air — it is the sandy, fast-draining soil and shallow water table under most Orange and Seminole County slabs-on-grade, which push moisture vapor straight up into the coating. Add the afternoon thunderstorm season (June through September) and a slab can read damp even on a sunny morning. High humidity also slows curing and invites amine blush, a waxy film that destroys the bond between coats. The fix is not a better product — it is process: moisture-testing the slab, running industrial dehumidifiers during application, and holding the concrete above the dew point until the floor is fully cured. Read our full humidity guide →

Yes — but it requires deferred-coating prep, and Central Florida has plenty of slabs that need it. Both Ian and Milton dumped feet of rain inland, and neighborhoods around the Econlockhatchee, Wekiva, and Lake Apopka basins, plus low-lying parts of east Orange and Seminole County, took on standing water for days. We will not coat a slab that flooded until ASTM F2170 in-situ relative-humidity probes come back clean — typically 60 to 90 days after the event for slab-on-grade sitting on our high water table. A slab that absorbed freshwater floodwater carries lingering moisture, mineral salts, and raised pH that no topcoat will hide. Our post-flood prep is antimicrobial treatment, extended drying, diamond grinding to a CSP-3 profile to cut out the efflorescence, then a moisture-tolerant primer before the finish coat ever goes down.

In Orlando the easiest stretch is the dry season — roughly November through April — when the afternoon storms stop, humidity eases into the 60s, and daytime highs settle in the comfortable 70s. That window also lines up with how a lot of Central Florida schedules home projects: snowbirds want the garage done before they head back north, and vacation-rental owners around Davenport and Champions Gate book the slower spring before peak booking season. We install year-round, including through the wet summer, because we already moisture-test every slab and time application around the dew point with dehumidification — but if you have a choice of date, the dry season is the most forgiving.

Epoxy flooring in Orlando typically runs $5 to $12 per square foot for residential work, depending on the coating system and the condition of the slab. A standard 2-car garage (about 400–600 sq ft) most often lands between $4,000 and $5,500 installed for a quality flake or full-broadcast system. Metallic and decorative finishes run higher — figure $9 to $14 per square foot — while larger commercial floors come down to roughly $3 to $8 per square foot at scale. What moves the number in Central Florida is almost always the prep: moisture mitigation for a damp slab, crack and joint repair, and grinding out a previous failed coating. For the full line-item breakdown, see our epoxy flooring cost guide for Orlando, or contact us for a free estimate on your specific project.

View our detailed Orlando pricing guide →

For most Orlando homeowners it is one of the highest-return improvements you can make. A typical garage coating in the $4,000–$5,500 range turns a stained, dust-shedding slab into a sealed, showroom-clean surface that handles 10 to 30 years of Florida heat with almost no upkeep — and a finished garage shows well to buyers in a market where move-in-ready sells. The case is even stronger for the businesses we work with around the metro: theme-park-corridor retail, showrooms, restaurants, and warehouses lose money every time a floor has to be patched or shut down for cleaning, and a single epoxy install ends that recurring cost while meeting health and safety requirements.

A typical Orlando garage is a 1-to-2-day job, and you can usually walk on it the next day and park on it 5 to 7 days after curing. The one Central Florida wrinkle is humidity: on a high-moisture summer day we build in extra cure time and dehumidification rather than rush a coat and risk it lifting later, so we will give you a realistic date based on your slab, not a one-size-fits-all promise. Commercial and industrial floors run 2 to 5 days depending on square footage and the system. We handle everything from the moisture test to final cleanup — your only job is clearing the space. See our garage installation process →

Both are professional systems, but they behave very differently in Orlando's heat and humidity. Straight epoxy bonds hard and shrugs off chemicals, but it cures slowly (24–72 hours), is fussy about humidity while it goes off, and — this matters here — a non-UV-stable epoxy will amber and chalk under our intense Central Florida sun, especially near a sunny garage door or in any space that catches direct light. Polyaspartic cures in 2–6 hours, holds its color under UV, and tolerates a wider temperature and humidity window. For most Orlando garages and showrooms we recommend a hybrid: an epoxy base coat for grip and chemical resistance, topped with a UV-stable polyaspartic clear coat that keeps the color true and gets you back on the floor faster. Learn how Florida climate affects coating choice →

Yes — the floor has to be completely bare so we can grind and coat it properly. Most Orlando homeowners need an hour or two to clear a garage, and a tip for our climate: pull anything moisture-sensitive (cardboard boxes, paper storage) out the night before, since the grinding and curing process is dusty and we run dehumidifiers. For businesses, we build a phased schedule around your hours so a restaurant, shop, or warehouse keeps running while we work section by section.

A professionally installed floor lasts roughly 10 to 30 years in an Orlando home and 5 to 20 years in high-traffic commercial or industrial space, depending on the system and upkeep. In Central Florida the deciding factor is almost never the brand of epoxy — it is whether the slab was moisture-tested and mechanically ground before coating. The cheap, bond-on-a-clean-day floors that DIY kits and discount installers leave behind are exactly the ones we get called to replace, often peeling within one to three wet seasons. Do the prep right and the floor outlasts the slab. Need a repair? We fix failed floors →

Almost none. A weekly broom or dust-mop and an occasional damp mop is the whole routine — no waxing, sealing, or refinishing, ever. In Orlando the everyday mess is fine Florida sand, lawn clippings, and the odd oil drip, and a quick hose-down clears all of it. Just skip harsh acidic cleaners and steel-bristle brooms, which can dull or scratch the topcoat over time.

Yes. Ascent Epoxy Orlando serves all of Orange, Seminole, Osceola, and Lake counties — including Winter Park, Kissimmee, Sanford, Lake Mary, Apopka, Ocoee, Maitland, Winter Garden, Altamonte Springs, Longwood, Casselberry, Oviedo, St. Cloud, Celebration, Clermont, and Mount Dora. We also cover the Davenport / Champions Gate vacation-rental corridor in Polk County. Our standard service radius is 35 miles from downtown Orlando.

View all service areas →

Yes. Ascent Epoxy Orlando is fully licensed and insured to work throughout Central Florida, carrying both general liability and workers' compensation coverage. We are glad to send proof of insurance and licensing before we start — and if your HOA or a commercial property manager needs documentation on file, just ask and we will provide it.

No. Ascent Epoxy is locally founded and locally owned, with a crew based right here in the Orlando metro — not a national brand selling territories. When you call, you reach our team directly, not a call center that hands your job to a subcontractor you have never met. You will know your installer's name before they pull into the driveway, and you will have a direct number if anything comes up during or after the project.

Ask to see it in writing before you sign anything. A real warranty spells out what is covered, what voids it, how long it runs, and exactly how to file a claim. In a humid market like Orlando the line that matters most is whether peeling and delamination — the failures driven by moisture coming up through the slab — are actually covered, because that is what fails here. A "lifetime warranty" splashed on a website with no written terms behind it is a red flag. At Ascent Epoxy we put our warranty terms in front of you and walk through every line before any work begins.